Products
XG/W8 7017-1 High and Low Temperature Grease
Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.
Keywords: automotive industry grease | power tool grease | general lubricating grease
Classification:
XG/W8 7017-1 High and Low Temperature Grease
Overview
This product is made of high-quality synthetic oil thickened by special compounds, and refined by adding various additives such as anti-oxidation, anti-rust, extreme pressure and anti-wear.
Main technical indicators
|
Item Objective |
Typical data |
Test Method |
|
Appearance |
gray uniform ointment |
visual inspection |
|
Dropping point,℃ |
＞330 |
GB/T 3498 |
|
cone penetration(1/4 taper penetration),0.1mm |
69 |
GB/T 269 |
|
degree of evaporation(200℃),%(m/m) |
1.02 |
SH/T 0337 |
|
similar viscosity(-50 ℃,10s-1)，Pa•s |
1273 |
SH/T 0048 |
|
Corrosion(T3copper sheet,100 ℃,3h) |
Qualified |
SH/T 0331 |
Main performance
1) Good high and low temperature performance, can be used normally in a wide temperature range, especially excellent high temperature performance, and has a long bearing service life under high temperature conditions;
2) Good water shower resistance, it can also provide reliable lubrication for bearings in humid environments;
3) Good oxidation resistance to ensure long-term use at high temperatures;
4) Good rust resistance to ensure that the bearing parts are not rusted.
Use
It is suitable for lubrication of rolling bearings working under high temperature, high speed or severe cold conditions, and can provide reliable lubrication for bearings in a wide working temperature range. Such as aviation motor, electrical appliances, clutch thrust bearings, high temperature fan, racing wheel bearings, plastic stretch tenter, polyester heat setting machine, resin finishing machine, molten salt pump motor, long ring steaming machine, high temperature dyeing cylinder, steam machine, anti-shrink machine and other high temperature operation bearing lubrication.
Applicable temperature range:-60 ℃ ~ 250 ℃, short-term can reach 280 ℃.
Precautions
When using, clean the lubricating parts to avoid pollution, and do not mix with other grease.
Packing specification
This product uses 1kg plastic barrel, 15kg plastic barrel packaging.
message