XG/L24 Special Grease for Corrugating Machine

Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.

Keywords: automotive industry grease | power tool grease | general lubricating grease

Classification:

Online consultation

Overview

This product is made of high viscosity synthetic oil thickened by composite metal soap and refined by adding additives such as anti-wear, anti-oxygen and anti-rust agents.

Main technical indicators

Serial Number	Project	Typical data	Test Method
1	Working cone penetration, 0.1mm	220-250	GB/T269
2	Dropping point, ℃	>330	GB/T3498
3	Corrosion (T2 copper sheet, 100 ℃,24h)	Qualified	GB/T7326
3	Steel mesh oil separation (100 ℃,24h),%	0.12	SH/T0324
4	Evaporation loss (200 ℃),%(m/m)	0.20	SH/T0203
5	Oxidation stability (99 ℃,100h,0.770Mpa) pressure drop, Mpa	0	SH/T0325

Main performance

1) Excellent high temperature resistance, the friction part will not be lubricated at relatively high temperature or high ambient temperature, and the bearing or friction pair will be continuously protected, effectively prolonging the service life of the bearing at high temperature.
2) Good extreme pressure and anti-wear performance, to meet the high load or a certain impact load mechanical equipment bearing lubrication.
3) excellent oxidation stability, to ensure that the grease in the use of the process has a long service life.
4) Excellent fluidity to ensure the pumpability of the grease.

Use

This product is suitable for the lubrication of corrugated machine bearings in the paper industry; it is also suitable for high temperature or cold work and rolling bearings with a wide temperature range of work when the temperature exceeds 200 ℃.
Use temperature range:-45~250 ℃, short-term up to 280 ℃.

Precautions

When using, clean the lubricating parts to avoid pollution, and do not mix with other grease. If there is a small amount of oil leakage in the grease, it can be mixed evenly before use.

Packing specification

This product is packed in 18kg plastic drum and 180kg iron drum.