Products
XG/W3 7014-1 High Temperature Grease
Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.
Keywords: automotive industry grease | power tool grease | general lubricating grease
Classification:
XG/W3 7014-1 High Temperature Grease
Overview
This product is based on a new type of compound soap thickening synthetic oil, and add multi-effect additives refined.
Main technical indicators
|
Item Objective |
Typical data |
Test Method |
|
working cone penetration,0.1mm |
265-295 |
GB/T 269 |
|
Dropping point, ℃ |
290 |
GB/T 3498 |
|
Corrosion (T2copper sheet,100°C, 24h） |
Copper without green or black change |
GB/T 7326 B Method |
|
Leaching loss (38°C, 1h）,% （m/m） |
5 |
SH/T 0109 |
|
oxidation stability, pressure drop, MPa （99 ℃,100h,0.770MPa） |
0.070 |
SH/T 0325 |
|
Steel mesh oil distribution (100°C, 24h）,﹪ (m/m） |
5 |
SH/T 0324 |
|
Extreme pressure performance (four ball machine method) PD,N ZMZ,N |
3089 441 |
SH/T 0202 |
|
Extreme pressure performance (Timken method)OK value, N |
156 |
SH/T 0203 |
|
Degree of evaporation (180 ℃,1h），%（m/m） |
5 |
SH/T 0337 |
Main performance
It has good lubricity, protection, oxidation resistance, water resistance and long service life.
Use
It is suitable for lubrication of various mechanical rolling bearings and sliding bearings under high temperature and high speed conditions. Such as large chemical plant auxiliary boiler rotating nozzle bearings, plastic extruder sleeve bearings, cracking furnace induced draft fan, regeneration gas compressor and other high temperature bearings; Textile industry heat setting drying chamber, baking machine, high temperature dyeing cylinder, etc., as well as the high temperature environment of gear, chain, clutch lubrication.
Applicable temperature:-40~200 ℃.
Precautions
When using, clean the lubricating parts to avoid pollution, and do not mix with other grease. If there is a small amount of oil leakage in the grease, it can be mixed evenly before use.
Packing specification
This product is packed in 18kg plastic drum and 180kg iron drum.
Previous
message