Products
XG/U13 Special Grease for Sintering Machine
Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.
Keywords: automotive industry grease | power tool grease | general lubricating grease
Classification:
XG/U13 Special Grease for Sintering Machine
Overview
This product with polyurea thickening refined mineral oil, and add antioxidants, rust inhibitors and other additives, made by a special process.
Main technical indicators
|
Project |
Typical data |
Test Method |
||
|
0# |
1# |
2# |
||
|
Working cone penetration 0.1mm |
355 |
324 |
282 |
GB/T269 |
|
Dropping point ℃ |
264 |
265 |
278 |
GB/T4929 |
|
Corrosion (T2Copper, 100 ℃,24h) |
Copper without green or black change |
GB/T7326 (B) |
||
|
Steel mesh oil (100 ℃,24h)% |
4.1 |
3.5 |
3.1 |
SH/T0324 |
|
Evaporation capacity (99 ℃,22h)% |
0.9 |
0.8 |
0.7 |
GB/T7325 |
|
Similar viscosity (-10 ℃ for 10s-1）Pa.s |
160 |
168 |
236 |
SH/T0048 |
Main performance
This product has good rust resistance, water resistance and oxidation stability, and has excellent pumping, No. 1, No. 2 suitable for centralized lubrication system lubrication.
Use
This product has good rust resistance, water resistance and oxidation stability, and has excellent pumping, No. 1, No. 2 suitable for centralized lubrication system lubrication.
It is suitable for lubrication and sealing of relevant parts of sintering machine in metallurgical industry, and can also be used for lubrication of bearings of other high temperature equipment.
Applicable temperature:-20 ℃ ~ 160 ℃.
Precautions
During storage and use, water and impurities should be prevented from being mixed to avoid blocking the pipeline.
The centralized lubrication system is replaced with this product. It is not necessary to disassemble and wash the entire lubrication system. It is only necessary to inject this product into the centralized lubrication system and discharge the original grease until the product flows out from the lubrication point.
Packing specification
This product is packed in 18kg plastic drum and 180kg iron drum.
message