Products
XG/U12 high-grade special grease for sintering machine
Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.
Keywords: automotive industry grease | power tool grease | general lubricating grease
Classification:
XG/U12 high-grade special grease for sintering machine
Overview
This product is made of polyurea thickening high-quality base oil and adding a variety of functional additives. It is a new generation of special grease for sintering machines.
Main technical indicators
|
Project |
Typical data |
Test Method |
||
|
0# |
1# |
2# |
||
|
Working cone penetration 0.1mm |
355~385 |
310~340 |
265~295 |
GB/T269 |
|
Dropping point ℃ |
265 |
270 |
275 |
GB/T4929 |
|
Steel mesh oil (100 ℃,24h)% |
2.0 |
1.5 |
1.2 |
SH/T0324 |
|
Corrosion (T2 copper sheet, 100 ℃,24h) |
Copper without green or black change |
GB/T7326 (B) |
||
|
Evaporation capacity (99 ℃,22h)% |
0.9 |
0.8 |
0.7 |
GB/T7325 |
|
Similar viscosity (-10 ℃,10s-1）Pa.s |
160 |
180 |
280 |
SH/T0048 |
Main performance
Good high temperature resistance, can adapt to work in high temperature environment;
Excellent lubrication and sealing performance, can reduce the air leakage rate;
Excellent water resistance and water vapor resistance;
Excellent pumping performance, to meet the requirements of centralized lubrication system.
Use
It is suitable for centralized lubrication and sealing of elastic slideway of sintering machine in metallurgical industry. Also applicable to other high temperature conditions need to be lubricated and sealed slide or roller bearing friction parts.
Applicable temperature:-20 ℃ ~ 200 ℃.
Precautions
This product is non-toxic, when used without special protection is different from the general grease.
Packing specification
This product is packed in 18kg plastic drum and 180kg iron drum.
message