Products
XG/U1 high-grade special grease for continuous casting machine
Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.
Keywords: automotive industry grease | power tool grease | general lubricating grease
Classification:
XG/U1 high-grade special grease for continuous casting machine
Overview
This product is a kind of urea compound thickening high viscosity refined mineral oil, and add all kinds of antioxidant, antirust, extreme pressure and other additives by special process.
Main technical indicators
|
Project |
Typical data |
Test Method |
||
|
1# |
2# |
|||
|
Working cone penetration 0.1mm |
310~340 |
265~295 |
GB/T269 |
|
|
Dropping point ℃ |
275 |
280 |
GB/T3498 |
|
|
Steel mesh oil (100 ℃,24h)% |
1.8 |
1.5 |
SH/T0324 |
|
|
Corrosion (T2 copper sheet, 100 ℃,24h) |
Copper without green or black change |
GB/T7326 (B) |
||
|
Evaporation capacity (99 ℃,22h)% |
0.8 |
0.6 |
GB/T7325 |
|
|
Water leaching loss (38 ℃,1h)% |
3 |
3 |
SH/T0109 |
|
|
Similar viscosity (-10 ℃,10s-1）Pa.s |
450 |
700 |
SH/T0048 |
|
|
four-ball test |
PBN PDN |
100 × 9.8 315 × 9.8 |
100 × 9.8 315 × 9.8 |
GB/T3142 |
Main performance
Has good high temperature resistance, anti-water spray, colloidal stability, oxidation stability, mechanical stability and good pumping. No pungent smell, harmless to human body, in line with environmental requirements.
Use
Bearings of various parts of continuous casting equipment, roller table in front of furnace, shearing machine bearing, ear bearing of electric furnace, gear and bearing of ladle turntable, etc.
Applicable temperature:-20 ℃ ~ 200 ℃.
Precautions
This product is non-toxic, when used without special protection is different from the general grease.
1# is suitable for centralized lubrication system, 2# is suitable for manual greasing lubrication. The centralized lubrication system is replaced with this product. It is not necessary to disassemble and wash the entire lubrication system. It is only necessary to inject this product into the centralized lubrication system and discharge the original grease until the product flows out from the lubrication point.
Same quality products
|
Newport Brand Products |
Esso ESSO |
Krupp KLUBER |
Synergy |
German company BECHEM |
|
XG/U1 continuous casting machine High-grade special grease |
POLYREX |
GH-461 |
Yemaloop, L,H |
BERUTOX M21KN |
Packing specification
This product is packed in 18kg plastic drum and 180kg iron drum.
Previous
message