XG 6502 Continuous Casting Slab High Grade Grease

Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.

Keywords: automotive industry grease | power tool grease | general lubricating grease

Classification:

Online consultation

Overview

This product is a high-performance, multi-purpose extreme pressure grease made of a new thickening agent thickening high-viscosity refined mineral oil and adding high-temperature antioxidants.

Main technical indicators

Project		Typical data	Test Method
Working cone penetration, 0.1mm		315	GB/T 269
Dropping point, ℃		330	GB/T 3498
Leaching loss (79 ℃,1h),%		1.3	SH/T 0109
Corrosion (T2 copper sheet, 100 ℃,24h)		Copper without green or black change	GB/T 7326 B Method
Corrosion resistance (52 ℃,48h), Grade		Qualified	GB/T5018
Oxidation stability (99 ℃,100h,0.770Mpa) pressure drop, Mpa		0.020	SH/T 0325
Steel mesh oil (100 ℃,24h)%		1.37	SH/T 0324
Evaporation degree (180 ℃,1h),%		2.62	SH/T 0337
Wear resistance (392N,60min), wear scar diameter, mm		0.40	SH/T 0203
Four ball machine test	PB，N PD，N	981 3923	SH/T 0202

Main performance

1) Excellent extreme pressure and anti-wear performance, impact load resistance;
2) Good thermal stability and mechanical stability;
3) excellent water resistance, and there is no obvious change in consistency in contact with a large amount of water;
4) Excellent oxidation and corrosion resistance can extend the life of the equipment.

Use

It is especially suitable for the lubrication of industrial bearings running under humid, high temperature and heavy load conditions in the steel industry; such as billet, slab continuous caster, hot rolling, cold rolling roller bearings, tapping roller bearings and other mechanical equipment friction parts lubrication.
Use temperature range:-20~220 ℃.

Applicable temperature:

-20 ℃ ~ 200 ℃.

Precautions

Before use, should be coated with grease parts clean and blow dry after the injection of this product;
After the use, the box should be timely cover, so as not to mix impurities affect the use effect;
Do not mix with other oils and fats;
This product should be stored in a clean, dry and dark place.

Packing specification

This product is packed in 18kg plastic drum and 180kg iron drum.