Products
XG/U8 Super Roll Bearing Grease
Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.
Keywords: automotive industry grease | power tool grease | general lubricating grease
Classification:
XG/U8 Super Roll Bearing Grease
Overview
This product uses complex metal soap as thickener, high viscosity refined mineral oil as base oil, plus anti-wear extreme pressure, antioxidant and other high-efficiency additives made of grease.
Main technical indicators
|
Item Objective |
Typical data |
Test Method |
|||
|
1# |
2# |
3# |
|||
|
Appearance |
Dark brown uniform ointment |
visual inspection |
|||
|
Working cone penetration 0.1mm |
310~340 |
265~295 |
220~250 |
GB/T269 |
|
|
Dropping point℃ |
265 |
270 |
275 |
GB/T3498 |
|
|
Corrosion (T2copper sheet,100℃,24h） |
Qualified |
Qualified |
Qualified |
GB/T7326 |
|
|
Steel mesh oil distribution (100℃,24h）% |
1.5 |
1.0 |
0.5 |
SH/T0324 |
|
|
Leaching loss (38℃,1h）% |
1.3 |
1.0 |
0.7 |
SH/T0109 |
|
|
Evaporation (99℃,22h）% |
0.8 |
0.5 |
0.5 |
GB/T7325 |
|
|
Similar viscosity (-10℃,10s-1）Pa.s |
420 |
460 |
520 |
SH/T0048 |
|
|
four-ball test |
PB N PD N |
100×9.8 400×9.8 |
100×9.8 400×9.8 |
100×9.8 400×9.8 |
GB/T3142 |
Main performance
It has good anti-wear extreme pressure performance, water resistance, adhesion, mechanical stability, high temperature resistance. Under heavy load and shock load, it can still provide reliable lubrication for lubricating equipment. This product has good protective properties for metal.
Use
It is suitable for bearing lubrication under harsh conditions such as high temperature, high humidity, water shower, heavy load and impact load. Such as metallurgical equipment of cold rolling, hot rolling roll bearing lubrication, as well as steel mill furnace front roller and other high temperature parts of the bearing lubrication.
Applicable temperature:-20 ℃ ~ 180 ℃.
Precautions
This product is non-toxic, when used without special protection is different from the general grease.
1# is suitable for centralized lubrication system, 2# and 3# are suitable for manual greasing lubrication.
The centralized lubrication system is replaced with this product. It is not necessary to disassemble and wash the entire lubrication system. It is only necessary to inject this product into the centralized lubrication system and discharge the original grease until the product flows out from the lubrication point.
Packing specification
This product is packed in 18kg plastic drum and 180kg iron drum.
message