Products
XG/L16 roller bearing grease
Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.
Keywords: automotive industry grease | power tool grease | general lubricating grease
Classification:
XG/L16 roller bearing grease
Overview
This product uses complex soap thickening high viscosity mineral oil, and added with extreme pressure, anti-wear, anti-oxygen, anti-rust and other additives, refined. It is suitable for lubrication of bearings under harsh conditions such as water shower, heavy load and high temperature, such as lubrication of roller bearings in iron and steel industry.
Main technical indicators
|
Item Objective |
Typical data |
Test Method |
||
|
1# |
2# |
3# |
||
|
Working cone penetration 0.1mm |
310~340 |
265~295 |
220~250 |
GB/T269 |
|
Appearance |
Light yellow to brown uniform smooth ointment |
visual inspection |
||
|
Corrosion (T2copper sheet,100℃,24h） |
Copper without green or black change |
GB/T 7326(B) |
||
|
Dropping point℃ |
250 |
255 |
260 |
GB/T3498 |
|
Steel mesh oil distribution (100℃,24h）% |
2.0 |
1.8 |
1.5 |
SH/T0324 |
|
Leaching loss (38℃,1h）% |
2.0 |
1.4 |
0.9 |
SH/T0109 |
|
Extreme pressure performance (four ball machine method)PDvalue,N |
3089 |
3089 |
3089 |
GB/T3142 |
Main performance
Has good anti-wear extreme pressure performance, water resistance,Mechanical stabilityAnd high temperature resistance, and has good adhesion. Under heavy load and shock load, it can still provide reliable lubrication for lubricating equipment.
Use
It is suitable for bearings in various parts of continuous rolling and hot and cold rolling mill equipment in metallurgical industry, especially suitable for lubrication of roll bearings of wire rod and bar rolling mill. The product is also suitable for bearing lubrication in mining, machinery and transportation industries under severe conditions such as high temperature, humidity and heavy load.
Applicable temperature:-20 ℃ ~ 180 ℃.
Precautions
This product is non-toxic, when used without special protection is different from the general grease.
1# is suitable for centralized lubrication system, 2# and 3# are suitable for manual greasing lubrication.
The centralized lubrication system is replaced with this product. It is not necessary to disassemble and wash the entire lubrication system. It is only necessary to inject this product into the centralized lubrication system and discharge the original grease until the product flows out from the lubrication point.
Packing specification
This product is packed in 18kg plastic drum and 180kg iron drum.
message