Products
XG/U7 high temperature high speed universal motor grease
Overview: This product uses special compounds to thicken high-quality synthetic oil, and adds anti-oxygen, anti-rust, extreme pressure, anti-wear, flame retardant and other additives, refined by special process.
Keywords: automotive industry grease | power tool grease | general lubricating grease
Classification:
XG/U7 high temperature high speed universal motor grease
Overview
This product is urea thickening high viscosity index base oil, and add anti-oxygen, anti-rust, anti-corrosion, anti-wear, extreme pressure and other additives, made by special processing technology.
Main technical indicators
|
Project |
Typical data |
Test Method |
|
|
2# |
3# |
||
|
Working cone penetration 0.1mm |
265~295 |
220~250 |
GB/ T269 |
|
Dropping point ℃ |
272 | 278 | GB/ T3498 |
|
Steel mesh oil (100 ℃,24h)% |
1.3 |
1.0 |
SH/ T0324 |
|
Similar viscosity (-10 ℃,10s-1）Pa.s |
600 |
1000 |
SH/T 0048 |
|
Evaporation capacity (99 ℃,22h)% |
0.6 |
0.4 |
GB/T 0337 |
|
Corrosion (T2 copper sheet, 100 ℃,24h) |
Copper without green or black change |
GB/T 7326 (B) |
|
Main performance
It has a long service life.
It has better resistance to high-speed performance and can meet the long-term operation of bearings with 500000 DN values.
It has good high temperature resistance and can meet the requirements of high temperature H type motor.
It has good water resistance, and good ability to resist acid and alkali.
With good lubrication performance, it can not only meet the requirements of small and medium-sized motors, but also meet the requirements of large and extra-large motors.
Use
This product is suitable for a variety of large, medium and small types of motor bearings, especially more suitable for H-type motors, high speed secondary motors and large motors, or chemical industry contact acid, alkali gas, water vapor and other harsh conditions of the motor. The same applies to the above conditions of the pump, fan and other mechanical parts of the lubrication.
Applicable temperature:-20 ℃ ~ 200 ℃.
Precautions
When using this product, clean the lubricating parts to avoid pollution.
Packing specification
This product is packed in 1kg iron can, 18kg plastic drum and 180kg iron drum.
Previous
message